Boost gauge for a '87 GN

[jsd55]

Can someone please tell me where I can buy a turbo boost gauge on the cheap but decent and functional side. My console is full. The only ones I knew of was from ATR that offered a single on a pillar gauge mount. Also, will I need to buy additional tubing fittings? If so, what size tubing will I need to buy? Tommorw I'm installing a 3in down pipe with waste gate from HKS with a 30 lb boost controller. Scott was nice enogh to tell me to protect the motor with a new boost gauge because the stock one only reads to 15 psi (thank you Scott) I've owned my '87 GN since new and I relied on ATR all these years for parts, but they are gone now. Being a newbie to this site, it is clear you folks are clearly the experts on advice and how to make it happen..........thank you for your patience from a guy who's behind the times and not very computer wise.

[Keller]

VDO and AutoMeter both sell 2 1/16" 30 PSI boost gauges, and have hookup kits included or available. You can install them in A-pillar gauge pods. All of the major TR vendors sell both the gauges and pods.

There are three installation documents at http://www.gnttype.org/techarea/bodygauges/interiorpage.html

[jsd55]

oh thank you i saw the link to install from your archives ////is there a list of archive info i can access? how do i do that? please advise thanks jsd55

[Keller]

Anything dating from the mailing list days can be found here: http://www.gnttype.org/archives/search.html

All board posts can be searched using the "Search" button up at the top of the board header strip.

[jsd55]

thats way cool thank you so much jsd55