nixturbosix
05-27-2009, 04:07 PM
ok well i found out that the cam was installed incorrectly:doh: so i removed the bent exhaust push rods. and rocker arms and shaft. i removed the timing cover so my questions is how do i know if i'm on TDC of cylinder number 1 because i could not go by the valve before disassmbley because the cam was incorrect. i can turn the crank but i just need to ensure that im at TDC on compression stroke not exhaust. and also where do i put the marks on the timing gears. i cant find any info on where to set marks. and i'm pretty its not the same as a Chevy.