PDA

View Full Version : E-85...


adowningusa
04-16-2010, 10:51 PM
I suspicion I am not looking in the right place, but I am wondering about using E-85 in my newly acquired G.N.

I know from past experience that the tank needs to be cleaned along with fuel lines. I also suspicion that I would need a different fuel pump.

What about chips and fuel pressures? I know alcohol has a lower BTU than fuel.

Can some one point me in the right direction??

Thanks
Alan Downing

kenmosher
04-18-2010, 10:09 AM
Basically, you need a chip cut for the fuel (E85 has a stoich of about 9.6:1) and you need enough pump and injectors to support basically about 35% more fuel volume/flow than gasoline.

The tank and such should be fine without any special prep.

Fuel pressure should be the same as gasoline, if the chip is calibrated properly.

adowningusa
04-18-2010, 04:58 PM
Right now it has 36 lb injectors. Engine is stock. I need to look into the fuel pump situation.

What independents and vendors are doing those types of burns right now.

Thanks for your help Mr. Mosher.

Alan

kenmosher
04-18-2010, 07:30 PM
Try Full Throttle, Eric Marshall (Turbo Tweak), Cotton's, etc.

You'll need 60# injectors, a chip, and at least a Walbro pump