INJECTOR #s ARE THESE STOCK??

[smallblock413]

ok took a couple of pics and i found the numbers on the injector also did a little searching on the number...this is what i found im still not clear on if they are stock but i think so.....my #s are 0280150218,,,
here is what i found on my search..
http://www.witchhunter.com/flowdatapix/b0280150218.jpg

here are my pics
http://i348.photobucket.com/albums/q350/smallblock_2008/CAM_0117.jpg


http://i348.photobucket.com/albums/q350/smallblock_2008/CAM_0116.jpg

[Supercomp729l]

Not Stock, but would work with a stock chip. Based on the flow rates they compare more lile 30lb hr.
If you have a chip for 42LB injectors, you will need to have this corrected.

Tom

[smallblock413]

Not Stock, but would work with a stock chip. Based on the flow rates they compare more lile 30lb hr.
If you have a chip for 42LB injectors, you will need to have this corrected.

Tom

oh dang it...just installed TT chip ordered it for stock injectors...
so just what is a stock injector poundage hr.....and should i send the chip back for recali. to these injectors.....:dunno:.thanks

[Keller]

Not Stock, but would work with a stock chip.
I beg to differ. That Bosch part number is the stock TR injector.

http://www.gnttype.org/techarea/fuelsystem/injflow.html

What makes you think they are not?

If your chip is for stock injectors, you should be fine.

[Keller]

To convert CC / min to # / hr. :

http://www.witchhunter.com/injectorcalc1.php4
http://www.rceng.com/technical.aspx

They are 28-29 #/hr.

[smallblock413]

I beg to differ. That Bosch part number is the stock TR injector.

http://www.gnttype.org/techarea/fuelsystem/injflow.html

What makes you think they are not?

If your chip is for stock injectors, you should be fine.

cool...:six: