PDA

View Full Version : blower motor


jlat
05-19-2012, 07:38 PM
hello; I want a AC Delco blower motor for my 86 T. Where is the best place to buy one and whats the AC P/N for the correct one?
thanks
IBBY

kenmosher
05-20-2012, 09:12 AM
The revised AC Delco part number seems to be 19131214

http://www.rockauto.com/catalog/moreinfo.php?pk=921100

About $37

jlat
05-20-2012, 07:58 PM
hello; Thanks for the responce. My BM works but it's noisy and today I took it out and cleaned it the best I could and added a little lube to it. It's still noisy so it might be time to change it out. Have you done one? I'd like to duplicate that black seal that the BM sits on. What is that stuff and can I get it?
IBBY

kenmosher
05-20-2012, 09:45 PM
For no more than a new one costs, I'd just replace it.

Keller
05-21-2012, 12:56 AM
Trivial to replace.

I used this to seal all my heater box and blower motor mating surfaces.

http://www.amazon.com/protects-types-cable-moisture-corrosion/dp/B0002ZPINC

I'm sure there is a proper auto specific product, probably from 3M. However, I knew where to find this locally and easily.

jlat
06-14-2013, 09:05 PM
hello people; From another site there's a post about changing the stock blower wheel to one that's made of alum. and it moves more air. I'm going to try it and I need to look for that sealer.
IBBY

pajeff87
06-14-2013, 09:07 PM
You can purchase "strip caulk" in various widths at auto body supply shops, NAPA, and other places.

Shawn N
06-15-2013, 06:09 PM
hello people; From another site there's a post about changing the stock blower wheel to one that's made of alum. and it moves more air. I'm going to try it and I need to look for that sealer.
IBBY

What car is it off of and is an exact fit?

jlat
06-16-2013, 04:52 PM
hello; I'm having problems going to the Buick site for a p/n on that wheel. But I go to a few sites and this is one. Go to turbobuick.com and you'll find more info. But I went for VDO BW9301 wheel. There's another one also. It might need a location adjustment (up or down)on the BM shaft and that's it. It's a bit smaller in height, it's alum. and it's suppose to work.
I'll let you know when I get a new BM.
IBBY