PDA

View Full Version : F-41 Braces location


fastblackcar
08-10-2005, 07:41 AM
i bought a set of f 41 braces from ebay, where under the motor do they fit , what about the smaller bars, 1 set said under engine and the other said front support, ad said fom 79 cutlass,smaller set dont seem to fit from the rad support to the fender bolts.any help here
thanx

mybuick
08-14-2005, 12:13 PM
the oned under the car go from the radiator support to the engine crossmember.

the ones under the hood go from the radiator support to the fenders. i had to make mine fit alsobut they do go on.

also they make ones for behind the rear seat.. looks like 2 "XX"

Keller
08-14-2005, 02:52 PM
the oned under the car go from the radiator support to the engine crossmember.
I thought they really went from the front corners of the frame near the body monunts down to under the engine. (actually, under the car in the center) I suppose the mounts in question are used to mount the radiator support. I'll have to look at mine since its been so long since I've put them on. Regargdless, there are holes for them. No drilling required.

fastblackcar
08-16-2005, 07:38 PM
thanx for the help,ill try that place,keep info coming,will keep you informed

fastblackcar
08-18-2005, 11:58 AM
THANX FOR THE INFO, YOU WERE CORRECT, JUST A LITTLE DIFFERENT TRYING TO PLACE THEM , THERE IS A LEFT AND RIGHT THEY HAVE OFF SET BENDING, TRICKY GETTING THE BOLTS IN THE MOUNT UNDER ENGINE...BUT ALL DONE THANX AGAIN SCOTT
Tom