MAF sensor quit

[dbeers1]

Where can I purchase the whole conversion to LT1/LS1 +translator option? Any help, Thanks

[Keller]

See http://www.fullthrottlespeed.com/ They have all the components.

[dbeers1]

Scott, I am new to all of this. Do I only need to buy a LT1 MAF sensor to replace my stock one, or do I also need some type of translator? Thanks

[Keller]

You need the LT1 or LS1 MAF plus a Translator or Translator Plus as a good basic system.

[dbeers1]

Scott, thanks for the follow up. I guess I don't know the difference in the LT1 MAF and the LS1 MAF sensor, any suggestions? Thanks again!!

[PaCemkr86]

LT1 maf 3inch
LS1 maf 3.5 inch

[dbeers1]

Thanks for the info on the LT1 and LS1.

[dbeers1]

Thanks to all who helped me with the info. on converting from my original MAF sensor to the LT1/LS1 + Translator Pro. Hopefully only one more ?, do I have to purchase some different type of wiring sytem for the conversion? Thanks again!!

[PaCemkr86]

IF you order it from fullthrottle , they offer everything to make it a total plug in play package. no cuttin or splicing

[8487GN]

If you don't want to go through all that expense you might want to check out the discussion about GM actually making the original MAF again under the FAQs discussion about a MAF failing.

I just replaced my failing MAF with a reman dealer one and it works just fine.