PDA

View Full Version : Stall


(robbie/vinnie)
03-30-2006, 10:17 PM
How much stall do i need with a GT3561S with 212/212 comp cam , ported stock heads with 177.5 intake,1.5 exhaust,3" TH downpipe,stock intercooler with duttweiler neck,50lb injectors,62mm throttle body,2.5 hooker exhaust,LS1 3.5 MAF,3.5" big mouth cold air system with 3" up pipe.Any suggestions guys on the stall and what convertor.

JHensberry
03-31-2006, 07:23 PM
Well if you search the internet, 2 sites come up with PT3561S. The pagparts.com, which caters to rice burners quotes the HP at 600. The precisionturbo.net/price sheet shows 510HP. Either way you should be OK with a 2800 stall converter. The TA series has HP rating of 565 and call for a 2800 but can be used with a stock converter and have a stock appearance. The PT3561S has a .63 A/R Housing. HTH.

(robbie/vinnie)
03-31-2006, 07:51 PM
Great,would i be ok with 3000 - 3200 stall?

JHensberry
03-31-2006, 08:38 PM
If your motor is is able to put out in the 580HP+ range, then a 3000 stall should be fine.