Disk Brakes

[unrouly]

This is going to sound like a dumb question, but.. I pulled the calipers off
to replace my rotors,now here is the dumb question, there are two sleaves
on each of the rotors, the bolts that hold the calipers on go through these
sleaves, which side do the sleaves go on, the side facing the rotor or the
other side and is there a diagram or a picture of the caliper someplace?

Thanks in advance

Ken
unrouly@aol.com

[interceptor2]

if the bolts go thru the sleeves <look like little spacers> they belong in the caliper. should be an o-ring inside, clean and lube pins&caliper o-rings insert them into the caliper making sure they move freely back & forth after installig pads put cali on and place pins thru . cali shoud move freely in and out hth :flamer: :hail: