Can I use 16” GTA wheels on an 87 GN?

[oneofew]

I am thinking about buying a set of 16” X 8” GTA wheels for my 87 GN
They look very similar to GNX wheels.
The car is 100% stock if it matters.
Log pattern seems to be the same, however I am not too sure about the offset.
Will it fit ok? or I’ll be facing rubbing issues

Thanks
Steve

[Keller]

Yes! That is what most every one uses as GNX clone wheels. However, use 4 FRONT wheels. The rears have a huge offset that won't play whell with either end of your GN. If you can't procure used ones, you can get new ones from http://www.classicindustries.com/

[GNXDad]

You can use the rears also, but you need to use spacers. :nono:

The fronts are NO longer available from classic industries. Apparently the equipment/molding used to make them has broken(that's what CI tol me.) :( :( So predict the used fronts to increase in value!

[Keller]

You can use the rears also, but you need to use spacers.

That really isn't terribly safe. I wouldn't recommend doing it.

So they "broke the mold", eh? You'd think they'd be able to make them for at least a few more decades... ;)