PDA

View Full Version : 3.5 MAF pipe


81 elky
06-05-2007, 05:48 AM
I'm in need of a 3.5 MAF pipe. Anyone out there have a suggestion on which one? I have limited fabrication skills, and I'd like one I don't have to modify.

PaCemkr86
06-05-2007, 09:07 AM
i have only seen 3 inch and 4inch maf pipes

whats the inlet on your turbo, and thats what size pipe ya need

ryan87gn
06-05-2007, 12:21 PM
checkout the buickgn.com website. i picked one up from there.

81 elky
06-05-2007, 07:21 PM
I'll check that site. I found a 3.5 at HRParts and stuff, but the actual pipe is all straight and the bends are made via the couplings (molded in degreed bends). I plan to use the LS1 maf, wouldn't I want a 3.5 pipe? I have the stock turbo inlet.

PaCemkr86
06-05-2007, 07:27 PM
im sure it will look good.. i just dont see any sense if the inlet on the turbo is only 3inch..

mY daily driver GN has a LS1 3.5 maf and 3inch pipe, i just have one boot that goes from 3.5 to 3 and on to the turbo. good enough for my daily driver to go low 11's.

link me to this pipe you are looking at..

81 elky
06-05-2007, 07:33 PM
Thanks for the quick respons Phil, and I stand corrected. It is the one Ryan mentioned at buickgn.com. Which 3 inch do you recommend?

PaCemkr86
06-05-2007, 08:13 PM
i like the ones from buickgn.com

but this is the one i run on my daily driver
http://cgi.ebay.com/ebaymotors/BUICK-GRAND-NATIONAL-T-TYPE-3-8-TURBO-MAS-AIRFLOW-PIPE_W0QQcmdZViewItemQQcategoryZ38634QQihZ002QQite mZ120127447515QQrdZ1QQsspagenameZWDVW

http://gn1performance.com/products/flow_pipe.php

and this is the one on my ttype

http://www.gnttype.org/forums/showthread.php?t=9063