PDA

View Full Version : LS1 vrs Z06 MAF


PaCemkr86
06-05-2007, 09:43 PM
http://www.ccstreetscene.com/philgn/maf1.jpg
http://www.ccstreetscene.com/philgn/maf2.jpg
http://www.ccstreetscene.com/philgn/maf3.jpg
http://www.ccstreetscene.com/philgn/maf4.jpg

Keller
06-05-2007, 09:54 PM
Z06 on the right in all those pics.

So, looks like there is a lot of 'stuff' inside the Z06 sensor. (Larger runner, etc.) Think its worth the bother of fitting the larger one up?

PaCemkr86
06-05-2007, 10:30 PM
not sure, but im gonna do it and try it out

1986GN
06-06-2007, 12:40 AM
i originaly bought a zo6 with the 5 pin connector.but i was unable to find the right hoses to hook up to my 3 inch intake pipe. would this be mutch better than my LT1 maf(still have z06 maf)? thanks gil

PaCemkr86
06-06-2007, 12:45 AM
it looks like i might be able to squeeze a 3.5 "LS1" boot over the Z06 maf..
i'll be messing with this project in the next few days as i try and get my TType finally back on the road..

PaCemkr86
06-06-2007, 12:49 AM
this one might work for you

http://cgi.ebay.com/ebaymotors/3-3-5-Intercooler-Hose-Reducer-Coupler-Intake-Turbo_W0QQcmdZViewItemQQcategoryZ38634QQihZ008QQit emZ180126197514QQrdZ1QQsspagenameZWDVW

im looking for a 3.5 to 4inch boot as im running a 4inch maf pipe

http://www.gnttype.org/forums/attachment.php?attachmentid=820&stc=1

IL KIM
06-06-2007, 08:54 PM
im looking for a 3.5 to 4inch boot as im running a 4inch maf pipe

[/IMG]
Phil! TNT-30640-1 from SummitRacing - $45.95. I got some hose adaptors from G-Body as well....

PaCemkr86
06-06-2007, 09:36 PM
thanks for the link, scored this one off ebay last night for 17 bucks
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150058147406&rd=1,1