PDA

View Full Version : Boost Solenoid for Translator Pro


Fast_t_type
06-16-2007, 09:15 AM
Does anyone out there have the high boost solenoid for the Translator Pro?
I have the plug and play under hood wires but I have know idea how to hook the wire that goes from the 8 plug with the signal wire attached?????? Where do you hook this wire up. I can figure where to plug it in to the pro, that's a no brainier but where the other end of the wire splices in have no idea.
I hope I can get this thing done today.

PaCemkr86
06-16-2007, 03:14 PM
http://www.fullthrottletech.com/attachment.php?attachmentid=186&d=1139512377

Fast_t_type
06-16-2007, 10:02 PM
Thanks Phill I'll try to make head or tails of this. I wish when I got the thing it came with instructions LOL

PaCemkr86
06-16-2007, 11:36 PM
how many wires are coming out of the boost controller?

socalgn
06-17-2007, 12:23 PM
Hey, Phil, is that diagram for the Boost Commander or Pro hi-boost solenoid?

PaCemkr86
06-17-2007, 12:49 PM
too be honest im not sure

Fast_t_type
06-17-2007, 01:13 PM
Wire's from the high boost solenoid 2, but I have plug and play harness for it so it hooks up to the factory harness under the hood.Wire's from the T Pro to where ever it goes, 1 wire. It does have really breif instrutions as I said when I called you yester day. Hook wire to boost controll. Thats it. So........ do I cut, splice, wire in..........??????????

socalgn
06-17-2007, 01:14 PM
It's pretty simple to hook up the boost solenoid......

1) use the plug and play harness under the hood.
2) the 1 wire that plugs into the Pro goes into the factory harness- engine side of D-3, you'll find either a pink/white or purple/white wire. That's the wire you connect to. Clip (cut) the wire (not too close to the connector), and leave yourself enough wire to reconnect it later (if you wish). Connect the Pro wire to the wire coming from the engine compartment, and you're done.

Does that make sense? PM me if you need help....

socalgn
06-17-2007, 01:18 PM
Also, if you have an analog dash, MAKE SURE that you cut the wires at pins B and G on the BLACK side of the C437 connector (connector has a black half and a clear half).

If you don't, things can get goofy......

Fast_t_type
06-17-2007, 11:08 PM
Thanks a lot. That makes a lot of sense. I'll get that done tomorrow. I think I already cut the wires that you said when I put the Pro in but I'll double check. Why do we need to cut these wire? I always wondered this.
Thanks again

socalgn
06-17-2007, 11:14 PM
Those are sources of 5v that will throw the Pro off.

PaCemkr86
06-18-2007, 09:02 AM
and if the wires arent cut, you cant flash to Tpro with the new updated software

socalgn
06-18-2007, 10:35 AM
and if the wires aren't cut, the flux capacitor can't flux...