PDA

View Full Version : powermaster replacement


russ
07-13-2007, 08:17 AM
Anyone have any tips/hints how to get the master cylinder actuator arm back onto the brake pedal ? It took quite a long prybar to get it off...

Russ

Survivor87
07-13-2007, 11:13 AM
http://www.gnttype.org/techarea/brakes/pmrebuild.html

Scroll down a little to where he is putting the unit back in the car...

I remember having trouble with mine as well, but I didn't have to remove the pushrod. However, you really need two people to get it done. (one under the hood, one under the dash).

Keller
07-13-2007, 11:39 AM
I think you have to work the arm on before the unit is bolted into the car. It is a two person job there for awhile.

russ
07-15-2007, 02:48 PM
Wow ! Much easier with the arm removed. Thanks guys.
Who gets credit for writing the procedure ?

Keller
07-15-2007, 04:08 PM
Longtime member Wayne Powell. Look at the upper-right of the procedure.