PDA

View Full Version : Install pics of Ebay ATR headers and Gbodyparts 3' DP


Turbo6Tech84
08-17-2007, 09:46 PM
Still needs some tweaking on the crossover pipe but the DP fit like a glove in there. A big thanks to Brian at gbodyparts for the dp I think I would have lost my mind if that dp didnt fit. Yeah those clamps that come with the headers are complete crap. Lets hope these headers last. Also is it normal for the headers to turn RED on normal driving?

http://img174.imageshack.us/img174/5026/gnexhaust001cn2.jpg
http://img174.imageshack.us/img174/610/gnexhaust002gq3.jpg
http://img250.imageshack.us/img250/9714/gnexhaust003yv8.jpg
http://img250.imageshack.us/img250/2416/gnexhaust004ko4.jpg

Lemme know what you think.

jcawley3
08-18-2007, 10:57 AM
Looks nice!

6 GUN
08-18-2007, 11:34 AM
In one of the pics. the down pipe looks real close to the plastic inner fender. I would keep an eye on it to make sure the heat does not melt it.
I trimmed mine a long time ago and I am using an atr 3" down pipe.

jcawley3
08-18-2007, 12:32 PM
are these the same as in your pics: 230161952486

http://cgi.ebay.com/ebaymotors/86-87-Buick-Grand-National-GN-Header-3-8L-Turbo-T-Type_W0QQcmdZViewItemQQcategoryZ33631QQihZ013QQite mZ230161952486QQrdZ1QQsspagenameZWDVW

PaCemkr86
08-18-2007, 03:04 PM
very nice... thank you for posting your installed pics.. nice job

Turbo6Tech84
08-18-2007, 07:26 PM
are these the same as in your pics: 230161952486

http://cgi.ebay.com/ebaymotors/86-87-Buick-Grand-National-GN-Header-3-8L-Turbo-T-Type_W0QQcmdZViewItemQQcategoryZ33631QQihZ013QQite mZ230161952486QQrdZ1QQsspagenameZWDVW

No this is from another ebayer by the name of hracing1234 as far as I know he doesnt have anymore headers for sale. They have a brand name of ERZ performance. Only problem with these headers is the crossover pipe definitely needs some tweaking.

Turbo6Tech84
08-18-2007, 07:28 PM
I'll definitely make some more room for the downpipe then so I dont melt anything.

PaCemkr86
08-18-2007, 08:43 PM
you can loosen the inner fender well and move it away from the DP and tighten it up

81 elky
08-26-2007, 07:50 PM
What about the turning red part?

kenmosher
08-27-2007, 09:43 AM
Stainless will do that with the application of high heat.... it's normal.

Turbo6Tech84
08-29-2007, 09:02 PM
Yep didnt take long at all for my headers and dp to turn funny colors