View Single Post
  #28  
Old 03-20-2009, 03:09 AM
jakeshoe jakeshoe is offline
The Trans Guy
 
Join Date: Aug 2007
Location: Texas
Posts: 25
jakeshoe is on a distinguished road
Default Re: 200-4R Rebuild ... step by step!

You can air check the unit as you assemble.
You air check the low clutches at the feed passage shown:




You can aircheck the OD clutches by applying air to the left feed hole and center support bolt in this photo.



The hole directly right of that is the forward clutch pack, then the directs, then the furthest right passageway and center support bolt is the reverse feed passage. It is blocked on this unit for the dual feed mod to the direct clutches.
Reply With Quote