This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
Machine Shop Recommendation
I'm looking for a trustworthy machine shop, in central Ohio, to do work on a pair of '87 V-6 heads.
The heads are warped approximately 0.0035" and need to be milled. I would also like a stock valve job using the stock valves. Finally, I am looking for a shop than can properly weld a cracked stock header. Any recommendations would be appreciated. Thanks. Art B. |
#2
|
|||
|
|||
Re: Machine Shop Recommendation
I would send them to weber and have them machine them.
|
#3
|
|||
|
|||
Re: Machine Shop Recommendation
I don't know about Weber.
Where are they located? Thanks. Art B. |
#4
|
||||
|
||||
Re: Machine Shop Recommendation
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
#5
|
|||
|
|||
Re: Machine Shop Recommendation
Thanks. I will contact them.
Art B. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|