GN and T-Type Performance Enthusiasts (GNTTYPE) Forums

GN and T-Type Performance Enthusiasts (GNTTYPE) Forums (http://gnttype.org/forums/index.php)
-   Brakes (http://gnttype.org/forums/forumdisplay.php?f=39)
-   -   Lock Line (http://gnttype.org/forums/showthread.php?t=12942)

MCHdrivesan86GN 07-20-2009 12:29 PM

Lock Line
 
Where can I get a lock line from? I didn't do an extensive search, so I apologize.


Thanks,
Charles

Keller 07-20-2009 01:21 PM

Re: Lock Line
 
Are you speaking of a line lock? The device used to do burnouts without stressing the rear brakes?

If so, the rebuildable Hurst unit seems to be one of the best choices. That one is a available at almost any speed shop, or online retailer. (Certainly the "large" ones like Summit, Jegs, etc.)

If you are asking about something else, let us know.

MCHdrivesan86GN 07-20-2009 01:39 PM

Re: Line Lock
 
bump......

PaCemkr86 07-20-2009 11:34 PM

Re: Lock Line
 
order a hurst from summit or jegs

MCHdrivesan86GN 07-21-2009 02:43 AM

Re: Lock Line
 
This is what I found. Is this correct and everything that is needed?

http://www.jegs.com/i/Hurst/530/174-5000/10002/-1

Thanks,
Charles

Keller 07-21-2009 10:25 AM

Re: Lock Line
 
That's the piece. :tup:

You may need a section of brake line to go to the brake booster. Unless you cut, flare, and put fittings on your existing line. Either way there is a *tiny* bit of bending, wiring, and customization to fitting it all up.

MCHdrivesan86GN 07-22-2009 11:06 PM

Re: Line Lock
 
Thank you. I'm getting ready to order it and post another thread.

81 elky 08-05-2009 09:10 PM

Re: Lock Line
 
Hope you got the installation kit too.

Keller 08-05-2009 11:47 PM

Re: Lock Line
 
Not sure what all they might include, other than a short length of brake line, pipe tape, and some plugs for the unused holes in the line lock. And those are things that can be procured though a parts store. Though getting them in one quick package is very nice and simple.

MCHdrivesan86GN 08-06-2009 06:39 PM

Re: Lock Line
 
Thanks for the information.


All times are GMT -4. The time now is 08:14 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.